Help in finding a beer equip. project

[yonkersbrewer]

Help! I saw a great project at a web site that I swore I would remember and damn if I didn't have one of my increasingly common senior moments and forget where I left it!

It was for a wooden bottle dryer and case combination primarily meant to be used during bottling. Great pictures and easy to follow instructions. As I remember it the case could be knocked down when it was not needed and had a way to double as a bottle dryer.

Any help in finding the site again beerily acknowledged!

[danno]

I think I vaguely remember what you're talking about, but I can't find any links for you....

best I can do is show you what I use for bottle drying, took me all of 15 minutes to make, sits over the back of my downstairs sink and works great... http://www.boomspeed.com/danno/bottledryer.jpg

[Tweek]

thats pretty clever, looks like it would be real easy to make several of them and just stack them.

I just bought a 90 bottle tree with the injector it really makes bottling way more enjoyable.

[yonkersbrewer]

Pretty handy. I actually use a 3 ft. piece of shelving lumber with 24 holes cut into it. Close but I am still looking for the breakdown wooden beer case.

[asciibaron]

my very low tech system involves lining the bottoms of the bottle cases with paper towels and inverting the bottles to drain after i squirt them with the sanitizer.

it seems to be the quickest solution - i would fill a case at a time - cap them, close the box and grab the next case. very easy to carry around the bottles too.

-steve

[asciibaron]

i found wooden beer case plans on the net. i saved the file on my site as a pdf...

www.asciibaron.com/beercase.pdf

hope that is what you were looking for.

-steve